The A1 Panel / Jointer Plane
|
|
This plane is designated A1 and the same profile/pattern was used through
the entire range of sizes. Usually starting at 13½" to 17½"
for panel planes, and 17½" to 28½" for jointers.
The picture above shows a 22½" A1 on which I used a particularly
nicely patterned piece of Rosewood, and the picture below shows a 28½"
Jointer.
|
|
|
|
Please click the photographs above for a large view.
NOTE : These pictures are large and will take approximately 40 seconds to load @56K.
|
